Download Print deze pagina

Electrical Safety; Device-Specific Safety Instructions - Lux Tools A-RMR-300-24 Vertaling Van De Oorspronkelijke Gebruiksaanwijzing

Advertenties

Electrical safety

• The device may only be connected to a
socket that is correctly installed and
grounded.
• The fuse must be a residual current cir-
cuit-breaker with a measured residual
current of no more than 30 mA.
• Make sure that the power supply corre-
sponds with the connection specifications
of the device before it is connected.
• The device may only be used within the
specified limitations for voltage and power
(see type plate).
• Do not touch the mains plug with wet
hands! Always pull out the mains plug at
the plug and not by the cable.
• Do not bend, crush, pull or drive over the
power cable, protect from sharp edges, oil
and heat.
• Do not lift the device using the cable or
use the cable for purposes other than
intended.
• Check the plug and cable before each
use.
• If the power cable is damaged immedi-
ately disconnect the plug. Never use the
device if the power cable is damaged.
• If the device is not in use make sure the
plug is pulled out.
• Make sure that the device is switched off
before plugging in the mains cable.
• Make sure that the device is switched off
before unplugging it.
• Disconnect the power supply before
transporting the device.
Handling rechargeable devices
• Danger of fire! Only use batteries
approved by the manufacturer. Only use
chargers approved by the manufacturer.
Keep battery away from metal objects that
could cause short circuiting when not in
use. There is a risk of injuries and fires.
• Prior to connecting the charger, verify that
the power supply connection corresponds
with the connecting data of the device.
• The fuse must be a residual current cir-
cuit-breaker with a measured residual
current of no more than 30 mA.
• Ensure that the device is switched off
before installing the battery.
• Never switch on the device during the
charging process.
• Fluid can escape from the battery when
used incorrectly. Battery fluid may result in
skin irritations and burns. Avoid contact!
In the event of accidental contact, rinse
thoroughly with water. Immediately seek
the aid of a physician in the event of eye
contact.
Maintenance
• Before conducting any maintenance on
the device, disconnect the mains plug.
• Only those maintenance and fault elimi-
nation tasks described here may be car-
ried out. Any other tasks must be com-
pleted by a specialist.
• Only use original replacement parts. Only
these replacement parts are designed
and suitable for the device. Other replace-
ment parts will not only lead to an invalida-
tion of the warranty, they may also endan-
ger you and your environment.

Device-specific safety instructions

• Carefully check the area where the tool is
to be used for wildlife and pets. Wildlife
and pets may be injured while the
machine is in operation. Thoroughly
check the working area and remove any
stones, sticks, wires, bones and foreign
objects. When using the machine, ensure
that no wildlife, pets or small tree stumps
are hidden in the dense grass. Avoid
using at dusk or in the dark to reduce the
risk of encountering animals.
• Pay attention when walking backwards.
Danger of stumbling!
• Pay attention to local regulations for rest
periods.
• Remember that moving parts may also be
located behind ventilation and venting
slots.
• Symbols affixed to your tools may not be
removed or covered. Information on the
device that is no longer legible must be
replaced immediately.
Observe the safety instructions be-
fore using the product for the first
time.
Read and observe the operating in-
structions before commissioning.
Risk of injury due to flying objects!
Always ensure sufficient safety dis-
tance is held.
Do not sit or stand on the mower.
GB
49

Advertenties

loading

Gerelateerde Producten voor Lux Tools A-RMR-300-24

Deze handleiding is ook geschikt voor:

648716