Inhoudsopgave
Advertenties
General
With a mulching kit, a conventional lawn
mower can be converted into a mulching
mower. For this purpose, the mowing
blade must be replaced with the mulching
blade and the grass catcher box must be
replaced with the mulch insert.
To enable the machine to be used again
as a grass collector, the mulching blade
must be replaced again with the mowing
blade.
1. For your safety
Observe the instruction manual of the lawn
mower, particularly the "For your safety"
and "Maintenance" sections. The
instructions for blade maintenance must
always be observed.
Detach the spark plug socket before
performing any work on the lawn mower.
Additionally close the tank ventilation
screw before placing the machine in the
cleaning position.
Before each use, perform a visual check to
ensure that the mulch insert, mulching
blade and blade fastening are in good
condition.
Only use the mulch insert in conjunction
with the mulching blade.
0478 909 9923 A - EN
2. Standard equipment
Item
Designation
A
Mulch insert
B
Mulching blade
C
Screw
D
Spring washer
–
Instruction manual
3. Assembly
3.1 Removing the mowing blade
● Locate the handlebar in the
service position.
● Remove the mowing blade.
See the instruction manual for the lawn
mower for a description of how to do this.
3.2 Installing the mulching blade
● Clean the blade contact surface
and blade holder.
● Secure blade fastening screw (C) with
Loctite 243.
● Fit mulching blade (B) on the blade
holder with the tabs (1) facing
outwards.
● Position spring washer (D) with the
convex facing outwards and tighten
with blade fastening screw (C) to
60 - 65 Nm.
Printed on chlorine-free bleached paper. Paper is recyclable. Cover is halogen free.
3.3 Installing the mulch insert
● Open the discharge flap and hold
it open.
● Guide mulch insert (A) into the mowing
1
channel, engage retaining tabs (1) in
Qty.
the openings in the housing and press
1
down gently to engage.
1
● Close the discharge flap.
1
● Locate the handlebar in the working
1
position (see the instruction manual for
1
the lawn mower for a description of how
to do this).
Removing the mulch insert
● Open the discharge flap and hold it
open.
● Pull up lever (2). Pull the mulch insert
out of the mowing channel.
2
3
4. Mulching instructions
4.1 General information
During mulching, the cut grass is chopped
up several times through a special air flow
4
guidance system in the mower blade area
and then blown back into the turf. The
clippings remain on the lawn.
The decomposing clippings return organic
nutrients to the soil, serving as a natural
fertiliser.
Emptying the grass catcher box and
disposal of the clippings are dispensed
with. Weed growth is slowed down and
significant amounts of fertilizer are saved.
5
5
Advertenties
Inhoudsopgave
