Inhoudsopgave
Advertenties
Make sure the following are inside the pack of the product you have purchased:
• high pressure cleaner;
• handle;
• high pressure delivery hose;
• spray gun;
• lance hose;
• rotating lance;
• bag of accessories with:
- the operating and maintenance manual;
- the engine operating and maintenance manual;
- the declaration of conformity;
- the warranty certificate;
- the handle fixing kit: screws, washers, nuts;
- suction kit with: fitting, filter and clamp;
- detergent suction hose kit including filter and clamp
- nozzle cleaning needle;
If any problems arise please contact your dealer or an authorised assistance centre.
You can add the following range of accessories to the standard ones supplied with your high pressure
cleaner:
• sandblasting lance: designed to smooth surfaces, removing rust, paint, encrustations, etc.;
• drain cleaning kit: designed to unclog pipes and ducts;
• different types of lances and nozzles;
• rotating brush: designed for cleaning fragile surfaces;
• foam lance: designed for a more efficient distribution of the detergent;
INSTALLATION - ASSEMBLING THE ACCESSORIES
AND FILLING THE ENGINE CRANKCASE WITH OIL
• Fix the handle (4) to the frame (3) using the kit supplied: screws (5), washers (6) and nuts (7) (use a 13
mm fixed jaw spanner, not supplied). Operation A in Fig. 1.
• Unwind the high pressure hose (28) and screw the end without the quickfit coupling onto the spray
gun (19) thread and tighten well with two 22 mm fixed jaw spanners (not supplied). Operation B in Fig. 5.
• Connect the quickfit coupling (32) to the water outlet fitting (15), screw down and tighten the ring nut
by hand. Operation C in Fig. 5.
• Fit the filter (24) in the water inlet connection (16). Operation D in Fig. 5.
• Clamp (10) the free end of the detergent suction hose (29) to the detergent suction fitting (33).
Operation E in Fig. 5.
• Fill the engine crankcase with oil, following the instructions given in the relevant operating and
maintenance manual (this is not to be done on machines with Diesel engines as they are filled with
oil in the factory).
STANDARD FITTING
OPTIONAL ACCESSORIES
EN
19
Advertenties
Inhoudsopgave
