Inhoudsopgave
Advertenties
White LED Receiver io
The default setting for this function is deactivated.
The procedure to be followed to activate or deactivate automatic cut-off of each LED light is identical:
• Press the my and Down buttons simultaneously on the control point until the LED light comes
on then goes out.
- If the LED light comes on then goes out once: the function is activated.
- If the LED light comes on then goes out twice: the function is deactivated.
2.2.3. Setting the time of functioning
The operating period of each LED light before automatic cut-off can be configured.
The default setting is 6 hours.
To alter these settings, for each LED light:
1) Briefly press the my and Down buttons simultaneously on the
1W io control point.
2) Immediately afterwards, press and keep depressed the my and
Down buttons simultaneously until the LED light comes on
then goes out.
• Briefly press the Down button to set the period to 3 hours.
• Or briefly press the my button to set the period to 6 hours.
• Or briefly press the Up button to set the period to 12 hours.
The LED light comes on then goes out.
3) Press the my button until the LED light comes on then goes out.
The new setting has been programmed.
2.3. TIPS AND ADVICE ON INSTALLATION
2.3.1. Questions about the white LED receiver io?
Observations
The LED light does not react at
all when a button is pressed on
the control point
The LED light comes on as soon
as the power is switched on.
Copyright
©
2018 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
Possible causes
The control point has not been
programmed into the white
LED Receiver io.
The batteries in the control
point are low.
The control point used is not
compatible with the white
LED receiver io.
The power supply is faulty.
The wiring is incorrect.
The wiring is incorrect.
0.5 s
< 2 s
= 3 h
= 6 h
Solutions
Follow the commissioning
procedure (see 2.2.)
Replace the batteries, using the
same battery model.
Ensure the two products are
compatible.
Check the power supply.
Check the wiring (see 2.1.)
Check the wiring (see 2.1.)
EN
= 12 h
5
Advertenties
Hoofdstukken
Inhoudsopgave
