Inhoudsopgave
Advertenties
EN
3.6. REPLACING A LOST OR BROKEN SOMFY IO CONTROL POINT
To replace a lost or broken io-homecontrol® control point, consult a home motorisation and
automation professional.
3.7. QUESTIONS ABOUT THE WHITE LED RECEIVER IO?
Observations
The LED light does not react at
all when a button is pressed on
the control point
4. TECHNICAL DATA
Radio frequency
Frequency bands and maximum power used
Degree of protection
Electrical insulation
Operating temperature
Power supply
Input power
Output current
Nominal power supply voltage
Contact temperature
Type of lamps compatible
Lamp power or range of lamp powers
compatible
Dimensions of the white LED receiver io (l x b x h)
Maximum number of connected control points
SOMFY ACTIVITES SA hereby declares that the radio equipment covered by these instructions
is in compliance with the requirements of Radio Directive 2014/53/EU and the other
essential requirements of the applicable European directives.
The full text of the EU Declaration of Conformity is available at www.somfy.com/ce.
8
Possible causes
The batteries in the control
point are weak.
The lighting system is faulty.
868-870 MHz io-homecontrol®, two-way
tri-band
868.000 MHz - 868.600 MHz e.r.p. < 25 mW
868.700 MHz - 869.200 MHz e.r.p. <25 mW
869.700 MHz - 870.000 MHz e.r.p. < 25 mW
IP 55
Class III
-20°C to +60°C
Use an AC/DC power supply providing the SELV
(12 V or 24 V DC)
10 A
3.75 A max. per output, 10 A max. for the
product as a whole
12/24 V ±10%
Tc = 80°C
LED controlled at constant voltage
90 W max. per output, 240 W max. for the
product as a whole
190 x 22 x 20 mm
3 per output
Copyright
©
2018 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
White LED Receiver io
Solutions
Replace the batteries, using the
same battery model.
Contact an installer.
Advertenties
Hoofdstukken
Inhoudsopgave
