Inhoudsopgave
Advertenties
White LED Receiver io
1) Switch off the mains power supply.
2) Connect the white LED receiver io to one or more white LED lights (A) and to the power supply
unit (B), observing the proper polarity in accordance with the table and illustration below.
mm
2
Ø ≥ 1
B
A
Wire 1
LED light no.1
Wire 2
LED light no.2
Wire 3
LED light no.3
Wire 4
LED light no.4
Wire 5
V+
Warning
If fewer than 4 LED lights are connected, insulate the unconnected wires of the
white LED receiver io using individual
3) Secure the white LED receiver io (using cable retainers, for example).
4) Connect the 12 V or 24 V power supply unit to the mains.
2.2. COMMISSIONING
This guide only describes commissioning using a 1W io control point.
For commissioning using any other io control point, refer to the corresponding guide.
LED on
Copyright
©
2018 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
A
protection.
LED off
LED position "my"
OFF
B
Blue wire
Brown wire
Variation of light intensity
EN
0 V
+12/24V
3
Advertenties
Hoofdstukken
Inhoudsopgave
