Advertenties
WeakAC
Strong distortion of the input voltage can result in the charger hardly operating or not
operating at all. If WeakAC is set, the charger will also accept a strongly distorted voltage, at
the cost of greater distortion of the input current.
Recommendation: Turn WeakAC on if the charger is hardly charging or not charging at all
(which is quite rare!). Also turn on the dynamic current limiter simultaneously, and reduce the
maximum charging current to prevent overloading the generator if necessary.
Not adjustable with DIP switches.
BoostFactor
Change this setting only after consulting with Victron Energy or with an engineer trained by
Victron Energy!
Not adjustable with DIP switches.
Programmable relay
By default, the multi-functional relay is set as an alarm relay, i.e. the relay will de-energise in
the event of an alarm or a pre-alarm (inverter almost too hot, ripple on the input almost too
high, battery voltage almost too low).
Not adjustable with DIP switches.
Near the connection terminals an LED illuminates when the relay is activated (refer to S, see
appendix A).
18
Advertenties
Gerelateerde Handleidingen voor Victron energy MultiPlus Compact 12/2000/80-50 120V
Gerelateerde Producten voor Victron energy MultiPlus Compact 12/2000/80-50 120V
- Victron energy MultiPlus Compact 12/2000/80-30 230 V
- Victron energy Phoenix 12/225
- Victron energy Phoenix MultiPlus 12/2000/120
- Victron energy Phoenix Inverter 12/2000
- Victron energy Phoenix MultiPlus 12/2000/100
- Victron energy Phoenix 12/220
- Victron energy Phoenix 12 250
- Victron energy Phoenix 12/1000
- Victron energy Phoenix 12/150
- Victron energy Phoenix Multi Compact 12/800/35
- Victron energy Phoenix Multi Compact 12/1200/50
- Victron energy Phoenix 12/600
- Victron energy Phoenix MultiPlus 12/3000/120
- Victron energy MultiPlus-II 120V
- Victron energy Phoenix 12/850
- Victron energy MultiPlus Compact 12/1200/50-16