Download Print deze pagina

Victron energy MultiPlus Compact 12/2000/80-50 120V Handleiding pagina 22

Advertenties

5.3 Configuration by computer

All settings can be changed by means of a computer or with a VE.Net panel (except for the

multi-functional relay and the VirtualSwitch when using VE.Net).

Some settings can be changed with DIP switches (see Section 5.2).

For changing settings with the computer, the following is required:

•

VEConfigure3 software: can be downloaded free of charge at

www.victronenergy.com.

A MK3-USB (VE.Bus to USB) interface.

•

Alternatively, the Interface MK2.2b (VE.Bus to RS232) can be used (RJ45 UTP

cable needed).

5.3.1 VE.Bus Quick Configure Setup

VE.Bus Quick Configure Setup is a software program with which systems with a maximum

of three MultiPlus units (parallel or three phase operation) can be configured in a simple

manner.

The software can be downloaded free of charge at www.victronenergy.com .

5.3.2 VE.Bus System Configurator

For configuring advanced applications and/or systems with four or more MultiPlus units,

VE.Bus System Configurator software must be used. The software can be downloaded

free of charge at www.victronenergy.com .

5.4 Configuration with a VE.Net panel

To this end, a VE.Net panel and the VE.Net to VE.Bus converter are required.

With VE.Net all parameters are accessible, with the exception of the programmable relay and

some other advanced settings.

Inhoudsopgave

Advertenties