Download Print deze pagina

Configuration With Dip Switches - Victron energy MultiPlus Compact 12/2000/80-50 120V Handleiding

Advertenties

5.5 Configuration with DIP switches

Some settings can be changed with DIP switches

Procedure:

a) Turn the Compact on, preferably without load and without AC voltage on the

inputs. The Compact will then operate in inverter mode.

b) Set the dipswitches as required.

c) Store the settings by moving Dip switch 8 to "on" and back to "off".

5.5.1. DIP switch 1 and 2

Default setting: to operate the product with the "On/Off/Charger Only" switch

ds 1: "off"

ds 2: "on"

The default setting is required when using the "On/Off/Charger Only" switch in the front

panel.

Setting for remote operation with a Multi Control Panel:

ds 1: "on"

ds 2: "off"

This setting is required when a Multi Control Panel is connected.

The Multi Control panel must be connected to one of the two RJ48 sockets B, see appendix

Setting for remote operation with a 3-way switch:

ds 1: "off"

ds 2: "off"

This setting is required when a 3-way switch is connected.

The 3-way switch must be wired to terminal L, see appendix A.

Only one remote control can be connected, i.e. either a switch or a remote control

panel.

In both cases the switch on the product itself should be "on".

5.5.2. DIP switch 3 to 7

These DIP switches can be used to set:

- Battery charge voltage and Absorption time

- Inverter frequency

- Search mode

- AC input current limit 30A or 50A

Inhoudsopgave

Advertenties