Safety Instructions - Victron energy MultiPlus Compact 12/2000/80-50 120V Handleiding

Advertenties

1. SAFETY INSTRUCTIONS

General

Please familiarize yourself with the safety features and instructions by first reading the

documentation supplied with this product before using the equipment. This product has been

designed and tested in accordance with international standards. The equipment must be

used exclusively for the purpose for which it was designed.

WARNING: ELECTRIC SHOCK HAZARD.

The product is used in conjunction with a permanent energy source (battery). Input and/or

output terminals may still be dangerously energized, even when the equipment is switched

off. Always switch off the AC supply and the battery before carrying out maintenance or

servicing the product.

The product has no internal user-serviceable components. Do not remove the front plate or

operate the product if any panels have been removed. All servicing must be undertaken by

qualified personnel.

Never use the product where there is a risk of gas or dust explosions. Consult the battery

manufacturer's information to ascertain that the product is intended for use in conjunction

with the battery. Always comply with the battery manufacturer's safety instructions.

WARNING: Do not lift heavy loads without assistance.

Installation

Read the installation instructions in the installation manual before installing the equipment.

This is a Safety Class I product (supplied with a protective grounding terminal).

Uninterruptible protective grounding must be provided at the AC input and/or output

terminals. Alternatively the grounding point located externally on the product may be

used. Whenever it is likely that the grounding protection has been damaged, the product

must be turned off and secured against unintended operation; please contact qualified

service staff.

Ensure that the DC and AC input cables are fused and fitted with circuit breakers. Never

replace a safety component with a different type. Consult the manual to determine the

correct component.

Before applying power, ensure that the available power source matches the configuration

settings of the product as described in the manual.

Inhoudsopgave

Advertenties