Cleaning and care
Erika should be cleaned and dried after
each use. Lack of or improper care of the
appliance can impair the functionality of
the ice cream maker.
• Never clean the appliance using run
ning water or other liquids. Especially
the motor and the compressor may not
come into contact with water.
• Refrain from using scratching or
abrasive cleaning agents.
Trouble shooting
If the appliance is not working properly, please follow these steps:
1. Check that you have followed the operating instructions precisely and correctly.
2. Check whether the table below offers a feasible solution.
3. Check that all fuses are intact.
Error codes
Error
Code
E 4
The motor has overheated.
The temperature sensor
E 5
has a fault.
26
Problem
• All removable parts can be cleaned in
the dishwasher.
• Wipe off the compressor housing with a
damp cloth.
• Dry off all parts well with a soft cloth be
fore assembling your appliance. Before
using the ice cream maker again, all parts
should be thoroughly cleaned and dry.
• The ice cream scoop should be washed
by hand.
Solution
Unplug the appliance and let it cool down for
1 hour.
Disconnect the mains plug and plug it back in.
Should the problem continue, please contact
Customer Service.