Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
6. If the kitchen unit walls are 16 mm thick:
Place the spacer on the outside of the upper hinge.
Do not cover the hole.
7. Place the compensating panel over the predrilled
holes on the top of the appliance and fix in place
using 3 screws (3.5 x 9.5 mm from the accessories
kit).
8. Shorten the cover strip to the height of the recess
and stick to the side wall of the appliance on the
door opening side.
28
9. Push the appliance into the recess until the lower
hinge stop butts against the front edge of the wall of
the unit.
10. Unscrew the transport lock.
Keep the transport lock for transporting it again in
the future.
11. Use the two screws to fasten the mounting angle for
the door transport lock to the appliance.
Advertenties
Hoofdstukken
Inhoudsopgave
