Download Inhoudsopgave Inhoud Print deze pagina

Technical Data; Reciprocating Saw; Noise Information And Vibration Values - Hilti SR 4-22 Handleiding

Inhoudsopgave

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

  • DUTCH, pagina 29
4

Technical data

4.1

Reciprocating saw

Product generation
Rated voltage
Weight in accordance with EPTA Procedure 01, without battery
Stroke rate
Stroke length
Keyless chuck for standard accessory tools
Storage temperature
Ambient temperature for operation
4.2
Battery
Battery operating voltage
Weight, battery
Ambient temperature for operation
Storage temperature
Battery charging starting temperature
4.3

Noise information and vibration values

The sound pressure and vibration values given in these instructions were measured in accordance with a
standardized test and can be used to compare one power tool with another. They can also be used for a
preliminary assessment of exposure.
The data given represent the main applications of the power tool. However, if the power tool is used for
different applications, with different accessory tools, or is poorly maintained, the data can vary. This can
significantly increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times when the power tool is switched
off, or when it is running but not actually being used for a job. This can significantly reduce exposure over
the total working period.
Identify additional safety measures to protect the operator from the effects of noise and/or vibration, for
example: maintaining the power tool and accessory tools, keeping the hands warm, organization of work
patterns.
Detailed information on the versions of the EN 62841 standards applied here is to be found in the
reproduction of the declaration of conformity
Noise information
Sound power level (L
WA
Uncertainty for the sound power level (K
Sound pressure level (L
Uncertainty for the sound pressure level (K
Vibration information
Vibration emission value for sawing chipboard (a
Vibration emission value for sawing wooden beams (a
Uncertainty (K)
20
English
)
)
WA
)
pA
)
pA
21.6 V
See the end of these operating
instructions
−17 ℃ ... 60 ℃
−20 ℃ ... 40 ℃
−10 ℃ ... 45 ℃
236.
)
B 22­55
h,B
B 22­85
)
B 22­55
h,WB
B 22­85
2243480
*2243480*
SR 4-22
02
21.6 V
2 kg
0 /min ... 3,000 /min
23.2 mm
1/2 in
−20 ℃ ... 70 ℃
−17 ℃ ... 60 ℃
SR 4-22
95 dB(A)
5 dB(A)
87 dB(A)
5 dB(A)
12.8 m/s²
11.1 m/s²
11.5 m/s²
12.2 m/s²
1.5 m/s²

Advertenties

Inhoudsopgave
loading

Inhoudsopgave