Download Inhoudsopgave Inhoud Print deze pagina

Stop Function; Recall Function - Benthaus Diamant 1004 Pro Montage-Instructies

Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

Operation

4.15 Stop function

The cooking process can be briefl y interrupted with the
STOP function, e.g. if the doorbell rings. The STOP
function must be released in order to continue cooking
at the same cooking level. If a timer has been set it will
pause and will then continue.
This function is only available for 10 minutes for reasons
of safety. The hob will then be switched off .
1. Pots and pans are on the cooking zones and the
required cooking levels have been set.
2. Press the Stop key
cooking level, the interval sign
3. The interruption is ended by fi rstly pressing the STOP
key and then the fl ashing sensor fi eld
the STOP key
When operating the sensor fi eld slide over the
complete sensor fi eld.
The second key must be pressed within 10 seconds,
otherwise the stop function will be maintained.

4.16 Recall function

(recovery function)
The most recent setting can be recovered if the hob is
switched off unintentionally.
The recall function only works if at least one cooking
zone is switched on.
1. The hob is inadvertently turned off by the ON/OFF key
of the hob
2. Within 6 seconds after turning it off , press the ON/OFF
key of the hob
The STOP key
afterwards.
The original cooking levels are restored. The cooking
process continues.
What can be restored:
Cooking levels of all cooking zones
Minutes and seconds of programmed timer functions
Automatic boost function
Power boost
Not to be restored:
Operation time limit (it is counted from 0)
. Instead of the selected
will light up.
.
.
again. The stop key LED will blink.
must be pressed immediately
ENG
left of
35

Advertenties

Inhoudsopgave
loading

Inhoudsopgave