Advertenties
Beschikbare talen
Beschikbare talen
u Enter the ending "/legacy/operator" in the ad-
dress line of the web browser (e.g.
192.168.123.123/legacy/operator).
u Enter the user name (operator) and password.
1 Password: See Commissioning data sheet
u Navigate to the menu "> 15118" . The menu
"> 15118" only appears if the parameter "15118
Configuration" is switched on.
u The vehicle ID is displayed under "Event Log-
ger".
u Copy the vehicle ID to the clipboard or note it
down.
2. Enter the vehicle ID in the web interface.
u Delete the ending "/legacy/operator" in the ad-
dress line of the web browser (e.g.
192.168.123.123).
u Enter the user name (operator) and password.
1 Password: See Commissioning data sheet
u Navigate to the menu "Authorization" and set
the following parameters:
Parameter
Setting
List of entries in
u Enter the vehicle ID.
local whitelist
15118 Configura-
u Select "Off".
tion
u Click the "Save" button to save the setting(s).
6.11 Reset the configuration to the factory
setting
The tasks described in this section may only
be carried out by a qualified electrician.
u Enter the ending "/legacy/operator" in the ad-
dress line of the web browser (e.g.
192.168.123.123/legacy/operator).
u Enter the user name (operator) and password.
1 Password: See Commissioning data sheet
u Click the button "Operator Default & Restart" to
restore the factory settings and restart the
product.
36
6.12 Testing the product
The tasks described in this section may only
be carried out by a qualified electrician.
u At initial start-up, test the product in accordance
with IEC 60364-6 and the applicable national
regulations (e.g. in Germany: DIN VDE
0100-600).
The test can be carried out in conjunction with the
MENNEKES test box and standard-compliant test
equipment. The MENNEKES test box simulates
vehicle communication. Test boxes are available as
an accessory from MENNEKES.
6.13 Closing the product
The tasks described in this section may only
be carried out by a qualified electrician.
ATTENTION
Material damage due to crushed components or
cables
Damage and malfunctions can occur due to
crushed components or cables.
u When closing the product ensure that compon-
ents or cables are not crushed.
u Fix components or cables in place if necessary.
5
Fig. 18: Closing the product
2.
4
1.
3
1
2
Advertenties
