Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
1.3 Compatible Wireless Devices
Please refer to the instruction sheets of the following devices for more information.
The RF5132 v6.X can receive signals from the following devices:
• WLS912L-433 Glass Break Detector
• WLS914-433 Pet Immune PIR
• WS4904/WS8904 Motion Detector
• WS4904P/WS8904P Pet Immune PIR
• WS4916/WS8916 Smoke Detector
• WS4926 Smoke Detector
• WS4938 Panic Button
* Compatible with PC1616/PC1832/PC1864 v4.3 or higher control panels.
1.4 Safety Instructions
• This equipment shall be installed by Service Persons only (service person is defined as a person having the
appropriate technical training and experience necessary to be aware of hazards to which that person may be
exposed in performing a task and of measures to minimize the risks to that person or other persons). It shall be
installed and used within an environment that provides the pollution degree max 2, over voltages category II, in
non-hazardous, indoor locations only.
• Secure the receiver to the building structure before applying power to the alarm controller.
• Use at least two screws and/or adequate mounting means to secure the receiver to the building structure (e.g.,
Screws # 6×3/4" flat Phillips).
• WS4945/WS8945 Mini Door/Window Contact
• WS4939/WS8939 Wireless Key
• WS4969 Wireless Key with LED
• WS8965 Tri-Zone Door/Window Contact
• WS4985/WS8985 Flood Detector
• WS4975/WS8975 Door/Window Contact
• WS4913/WS8913 Carbon Monoxide Detector*
4
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
