Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
3 USING THE APPLIANCE
"Door Open" Indicator;
The "Door Open" indicator on the handle
shows whether the door has closed
properly or whether it remains open.
If the indicator is red, the door is still open.
If the indicator is white, the door is properly
closed.
"Door Open" Indicator
The freezer door should always be
kept closed. This will prevent food
products from defrosting. Any heavy ice
and frost build-up inside the freezer, and an
unnecessary increase in energy
consumption, will be avoided.
3.1 Thermostat Setting
The thermostat automatically regulates
the temperature inside the refrigerator and
freezer compartments. Cooler temperatures
can be obtained by rotating the knob to
higher numbers, 1 to 5.
Important note: Do not try to rotate
the knob beyond position 1, it will stop
your appliance from working.
Thermostat knob
Thermostat settings:
1 – 2 : For short-term storage of food in the
freezer compartment.
3 – 4 : For long-term storage of food in the
freezer compartment.
5: For freezing fresh food. The
appliance will work longer. Once
the food is fully frozen, reset the
thermostat to its original position.
Super freezing: This switch shall be used
as superfreeze switch. For maximum
freezing capacity, please turn on this switch
before 24 hours placing fresh food. After
placing fresh food in the freezer, 24 hours
ON position is generally sufficient. In order
to save energy, please turn off this switch
after 24 hours from placingfresh food.
3.2 Temperature Settings Warnings
• The ambient temperature, temperature of
the freshly stored food and how often the
door is opened affects the temperature in
the refrigerator compartment. If required,
change the temperature setting.
• It is not recommended that you operate
your fridge in environments colder than
10°C in terms of its efficiency.
• When setting the thermostat, take into
consideration how often the appliance
doors are opened and closed, how much
food is stored in the refrigerator, and the
environment in which the refrigerator is
located.
• When the appliance is first switched on,
allow it to run for 24 hours in order to
reach operating temperature. During this
time, do not open the door and do not
keep a large quantity of food inside.
• Unplug your appliance during a power cut
to prevent damage to the compressor.
Once power is restored, delay plugging
in your appliance for 5 to 10 minutes.
This will help prevent damage to the
appliance's components.
• Your appliance is designed to operate in
the ambient temperature ranges stated
in the standards, according to the climate
class stated in the information label. It
EN - 32
Advertenties
Hoofdstukken
Inhoudsopgave
