•
This heater is hot when in use. To avoid burns, do not let
bare skin touch hot surfaces. If provided, use handles
when moving the heater. Use gloves or oven mitts to avoid
serious injury.
•
Prior to cleaning or other maintenance, the appliance must
be disconnected from the power supply.
•
Allow the heater to thoroughly cool down before handling
or cleaning.
•
Do not use any abrasive cleaners or solvents, as heater
damage will occur.
•
To disconnect the heater from the mains power, first turn
the controls to the OFF position and then remove the plug
from the socket.
•
Ensure the heater is switched off and the power cord is
unplugged from the electrical outlet before cleaning the
heater.
•
Never insert fingers or metal objects into the vents and
openings of the heater.
•
Do not push any objects in the air inlet and outlet grills as
this may cause an electric shock, fire or damage the heater.
•
Avoid placing the power cord in areas where it can become
a tripping hazard. Do not place the power cord under
carpeting or cover it with rugs, runners or similar.
•
To avoid a circuit overload when using this heater, do
not operate another high-wattage heater on the same
electrical circuit.
•
Always plug the heater directly into a wall socket. Avoid
using extension leads where possible as they may overheat
and cause a risk of fire.
•
Do not use this appliance with an external programmer,
timer switch or any other devise which would switch the
device on automatically unless this has already been pre-
built into the appliance by the manufacturer.
•
Do not kink or wrap the power cord and plug around the
appliance, as this may cause the insulation to weaken or
split, particularly where it enters the appliance.
English | 5 of 83