15.4.3
Temperature Mode
Press the Function Key 3. to select the temperature. The preset temperature stage
"120°C" is selected and the device turns on.
With the + / - keys, you can change the settings at any time in a range from 60 –
240°C. (Temperature stages: 60, 70, 80, 90, 100, 120, 140, 160, 180, 200, 220 and
240°C).
Please note that the two functions of level and temperature can be chosen as
alternative. You can either work with the power levels or with the temperature stages.
The most recently selected function is active.
The temperature is measured by a sensor below the glass ceramic plate, therefore the
displayed temperature can deviate from the temperature in the pot.
► In case of grilling or cooking deep fry food we would advise you to use the function
"Temperature" as in this case you can use temperatures up to 240°C. Otherwise the
overheating protection "E05" will be activated.
15.4.4
Timer
Timer Function. Press the button Timer 2. With the +/- keys, you can now select the
operating time in 1-minute intervals (up to max. 180 minutes). Once the time is up, an
acoustic signal sounds and the device automatically goes into standby mode.
► During timer operation, you can change the duration at any time with the +/- keys. With
the memory function of the device, the power stage or temperature settings remain
unchanged here.
15.4.5
Switching Off
When you switch off the device via "On/Standby" and the temperature of the cooker
plate surface is lower than 50°C, the display shows „L". When the temperature of the
cooker plate surface is over 50 °C, it is displaying „H".
► Do not place any empty cookware on the ceramic field. Heating an empty pot or pan
activates the overheating protection and the device turns off.
► Do not operate the device if it is damaged in any way or does not function properly.
► The use of accessories and spare parts not recommended by the manufacturer may
lead to damage on the device and injuries.
16 Cleaning and Maintenance
This chapter provides you with important notices with regard to cleaning and maintaining
the device. Please observe the notices to prevent damages due to cleaning the device
incorrectly and to ensure trouble-free operation.
Please note
Please note
Please note
44