Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
T2
Short
Long press with
light on
Long press with
all loads off (mo-
tor and lights)
Short
T3
Long press with
light or motor on
Long press with
all loads off (mo-
tor and lights)
Short
T4
Long press with
light on and mo-
tor off
Long with motor
on
Long press with
all loads off (mo-
tor and lights)
Recommended device coupling sequence:
1 - K-Link Mode (See "connected mode" of remote control manual)
2 - K-Link Coupling (See hood manual)
3 - Remote Control-Hood Coupling (See remote control manual)
4 - K-Link Coupling (See hood manual)
5 - Cooktop-Hood Coupling (See induction cooktop manual)
Turns the motor on/off at the second speed.
24h Function
Activates/Deactivates the motor in the 24h Air Exchange mode, a
speed that allows suction of 10 minutes every hour, for a 24-hour
cycle.
Cannot be activated if the Intensive or Delay modes are active.
Wi-Fi connection
Activates/Deactivates the Wi-Fi Connection function.
Note: the Wi-Fi function is automatically activated when the user re-
quests the Wi-Fi configuration procedure.
Turns the motor on at the third speed.
Turns the motor on at the Intensive speed.
This speed is timed for 6 minutes. At the end of this time, the system
automatically returns to the previously selected speed. If activated
with the motor off, once the time has passed it switches to OFF
mode.
The Filter saturation alarm is reset.
Signals the saturated Metal Grease Filters alarm and the need to
wash them. The alarm is activated after 100 hours of effective hood
operation.
Signals the Activated Charcoal Odour Filter saturation alarm.
The alarm is activated after 200 hours of effective hood operation.
AUTO Mode
Activates/Deactivates the Automatic operating mode.
AUTO mode is deactivated whenever any other keys are pressed.
AUTO mode is activated when the key is pressed or the Coupled In-
duction Cooktop is turned on. The hood speed is automatically set
using the highest power level present on the hob. When the induc-
tion cooktop is turned off the last activated speed is held for 5
seconds, then speed 1 for 15 minutes. Once the 15 minutes have
passed the motor turns off. The light status does not change.
Induction/Gas Cooktop Selection
Select the type of cooktop in use, either Induction or Gas.
The Induction Cooktop is set by default.
Delay Function
Activates/Deactivates the Delay function (automatic shutdown of the
Motor and of the lighting delayed by 30').
Cannot be activated with Intensive or 24h function.
Wi-Fi configuration
Activates/Deactivates the Wi-Fi set-up procedure.
Before starting the procedure, use the Franke@Home App to re-
gister with the Franke IOT system. Then follow the instructions to
add a new device and register the domestic router.
If the procedure is not successfully completed within a few minutes,
deactivate it by long pressing the key again, then make another at-
tempt. The hood will nonetheless abandon the procedure if it is not
successfully completed within 15 minutes.
Fixed
Flashing
LED S1 Flashing:
connection to domestic
network in progress.
LED S1 Fixed: Wi-Fi
connection activated.
Fixed
Flashing
All LEDs flash 3 times.
LEDs T2 and T3 lit with
the hood off.
LEDs T2 and T3 flashing
with the hood off.
Fixed on: AUTO mode
activated.
Off: AUTO mode tempor-
arily deactivated.
1 Flash: confirms the In-
duction Cooktop selec-
tion.
2 Flashes: confirms the
Gas Cooktop selection.
Flashing
LEDs T3 and T4 flash-
ing: configuration pro-
cedure in progress.
Upon successful comple-
tion of the procedure
LEDs T3 and T4 will light
up for 2 seconds.
13
Advertenties
Inhoudsopgave
