Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
• Clean the hood using a damp cloth
and a neutral liquid detergent.
4. CONTROLS
Key
Key press
L
Short
Long press with
lights on
Long press with
all loads off (mo-
tor and lights)
T1
Short
Long press with
light on
Long press with
all loads off (mo-
tor and lights)
12
Function
The lights alternate between high intensity, medium intensity (if
present), off.
If there is an induction cooktop coupled with the hood and the hood
is off, as soon as the induction cooktop is turned on, the hood lights
automatically turn on at the maximum intensity.
It is possible to change the intensity of the light cyclically. Using long
separate presses it is possible to vary the tone of the light between
"warm" and "cold".
K-Link coupling
Before starting the procedure follow the specific instructions of the
manuals of the devices to be coupled.
For the remote control, see "connected mode".
Starts the pairing procedure between the hood and compatible K-
Link devices (induction cooktop or remote control). Up to 3 induction
cooktops can be paired and only one remote control. See the manual
of the devices for details of the operations that need to be performed
on these.
The coupling procedure takes 2 minutes. If no devices are recog-
nised within this time check that you have previously activated the
procedure for the devices to be coupled. The maximum number of
linkable devices may have been reached.
Turns the motor on/off at the first speed.
Activates/Deactivates the Activated Carbon Filters alarm.
K-Link uncoupling
Starts the procedure for the cancellation of all compatible K-Link
devices previously coupled with the K-Link coupling function.
• For external and internal cleaning of
the hood avoid alcoholic or silicone
products.
If the product or one of its parts is made
of stainless steel, use specific non-ab-
rasive products for cleaning and follow
the lines of the satin finish during clean-
ing.
LED
-
Flashing
LEDs T1 and T2 flash-
ing:
coupling in progress.
Upon successful comple-
tion of the procedure
LEDs T1 and T2 will light
up for 2 seconds.
Fixed
All LEDs flash twice:
alarm activated.
All LEDs lit for 1 second:
alarm deactivated.
Upon successful comple-
tion of the procedure
LEDs T1 and T2 flash 5
times.
Advertenties
Inhoudsopgave
