Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
ENGLISH
Make sure that you put the glass panels (A,
B and C) back in the correct sequence.
Check for the symbol / printing on the side
of the glass panel, each of the glass panels
looks different to make the disassembly
and assembly easier.
The screen-printing zone must face the in‐
ner side of the door. Make sure that after
the installation the surface of the glass pan‐
el frame on the screen-printing zones is not
rough when you touch it.
When installed correctly the door trim
clicks.
Make sure that you install the middle panel
of glass in the seats correctly.
How to replace: Lamp
Warning! Risk of electric shock.
The lamp can be hot.
Step 1
Turn off the oven. Wait until
the oven is cold.
Back lamp
Step 1
Turn the glass cover to remove it.
Step 2
Clean the glass cover.
Step 3
Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 4
Install the glass cover.
Before you replace the lamp:
Disconnect the oven from the
To download the full version visit www.ikea.com
A
B
Always hold the halogen lamp with a cloth to
prevent grease residue from burning on the
lamp.
Step 2
mains.
C
Step 3
Put a cloth on the bottom of
the cavity.
14
A
B
C
Advertenties
Inhoudsopgave
