6. Insert the cover over the exhaust air fil-
ter 20 at the bottom and close it. Press
the release button down slightly and
make sure that the cover clicks into
place firmly.
10. Cleaning and care
DANGER! Risk of injury!
Turn off the vacuum cleaner and unplug
the mains plug 21 before cleaning the
device.
WARNING! Risk of material dam-
age!
Do not clean using sharp objects or
abrasive cleaning agents.
Checking regularly
To maintain the full performance of your vac-
uum cleaner and to prevent damage to the
device:
• Check the dust bag indicator 4 regular-
ly (see "Dust bag indicator 4" on
page 28).
Empty/change the dust bag or elimi-
nate blockages if necessary.
• Check the nozzles for dirt such as lint or
hair regularly.
• Check all filters regularly for damage or
deformations. Damaged or deformed
filters that can no longer be cleaned
must be replaced.
• Regularly check the reusable dust bag
for damage. A damaged dust bag may
no longer be used.
• Check the cable and the device for
damage regularly.
Wiping down with a damp cloth
• Using a slightly damp cloth, wipe the
following parts:
- the device
- the hose 1
- the telescopic tube 14
- the plastic surfaces of the nozzles
• Let all parts dry completely before you
put them away or use the device again.
Brush cleaning
• Tap the brushes on the brush nozzle 2
and the floorhead 12. If e.g. hair has
become tangled, pull it off with your fin-
gers.
• You can also vacuum the brushes using
the handle 16 on the hose 1.
Wash out the reusable dust bag
DANGER! Risk of electric
shock due to moisture!
Allow the reusable dust bag to dry com-
pletely before reinserting it.
Wash out the reusable dust bag regularly
(depending on how dirty it is) under running
water.
1. Empty the dust bag (see "Emptying the
dust bag" on page 29).
2. Rinse the dust bag under cold running
water.
3. Allow the dust bag to dry completely
before closing it with the plastic rail and
reinserting it back into the vacuum
cleaner.
31
GB