Download Inhoudsopgave Inhoud Print deze pagina

Special Accessories; Before Startup; Attaching The Accessories; Start Up - Kärcher K 2 Originele Gebruiksaanwijzing

Verberg thumbnails Zie ook voor K 2:
Inhoudsopgave

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

  • DUTCH, pagina 39
11 Bearing wheel
12 Trigger gun
13 Lock trigger gun
14 Clamp for high pressure hose
15 High pressure hose
16 Spray lance with Dirtblaster
For strong contaminations
17 Spray lance with high pressure nozzle
For normal cleaning tasks.
———————————————––––
Optional accessories
18 Washing brush
Suitable for use with detergents.
19 Rotary washing brush
Suitable for use with detergents.
Especially suitable for cleaning cars.
20 Foam nozzle with detergent container
With powerful foam for effortless clean-
ing.
———————————————––––
Not included in the delivery
21 Water supply hose
Use a fabric reinforced water hose with
a commercially available coupling. Min-
imum diameter 13 mm (1/2 inch); mini-
mum length 7.5 m.

Special accessories

Special accessories expand the possibili-
ties of using your appliance. Please contact
your KÄRCHER dealer for further informa-
tion.

Before Startup

Attaching the Accessories

Mount loose parts delivered with appliance
prior to start-up.
Illustrations on Page 3
Illustration
 Insert the transport wheels and lock
them.
Illustration
 Attach the transport handle.
Illustration
 Screw the coupling element to the wa-
ter connection on the appliance.
16
Illustration
 Pull out the clamp for the high-pressure
hose from the hand spray gun (e.g. a
Philips screwdriver).
Illustration
 Connect high pressure hose to trigger
gun.
 Push the clamp in until it locks. Check
the secure connection by pulling on the
high-pressure hose.
For connection values, see type plate/tech-
nical data.
Observe regulations of water supplier.
Warning
According to applicable regulations, the ap-
pliance must never be used on the drinking
water net without a system separator. A
suitable system separator by KÄRCHER or
alternatively a system separator according
to EN 12729 type BA must be used.
Water that has flown through a system sep-
arator is no longer classified as drinking
water.
Notice
Always connect the system separator to
the water supply, never directly to the appli-
ance!
Notice
Impurities in the water can damage the
high-pressure pump and the accessories.
For protection, the use of the KÄRCHER
water filter (optional accessory, order no.
4.730-059) is recommended.
Notice
Dry running of more than 2 minutes leads to
damage of the high-pressure pump. If the
appliance does not build up pressure within
2 minutes, switch the appliance off and pro-
ceed in accordance with the instructions in
Chapter "Troubleshooting".
Illustration
 Connect the high pressure hose to the
high pressure connection of the appli-
ance.
– 7
EN
Water supply

Start up

Advertenties

Inhoudsopgave
loading

Inhoudsopgave