Advertenties
when ironing silk or synthetic fabrics.
HANDLING AFTER IRONING
Unplug the iron from the outlet. After the iron has cooled down, empty the reservoir by turning the iron upside down
and shaking it gently. Allow the iron to cool completely. Always place the iron in an upright position.
TIPS
1. We recommend using low temperatures when ironing fabrics that have special finishes, decorations (sequins,
embroidery, etc...).
2. If the fabric is made of different materials (for example, 40% cotton 60% synthetic fibers), set the thermostat to the
temperature of the material with a lower ironing temperature (in this case, it will be the ironing temperature of
synthetic fibers - that is, the low temperature).
3. If you do not know the composition of the fabric, determine the appropriate temperature by performing an ironing
test, on a part of the garment that is invisible under normal wear. Start with a low temperature and gradually increase
until you reach the right temperature, safe for the fabric.
4. Any dirt, stains are fixed after ironing, so before ironing, check whether the clothes are clean. If not, wash them
first.
5. The best results are achieved, when ironing dry, at medium temperature: too high a temperature or holding the iron
in one place for too long can cause yellow stains (burning).
6. To avoid the "shiny" effect of materials made of silk, wool or synthetic fibers, iron them turned inside out.
7. To prevent ironing marks on velvet, iron the material in one direction (along the fiber) and do not press the iron
against the material.
8. Many fabrics are easier to iron when they are not yet completely dry. For example, silk.
TECHNICAL DATA
Supply voltage: 220-240V ~50/60Hz
Nominal power: 2000-2400W
Maximum power: 3000W
Note hot surface:
The temperature of the accessible surfaces of the operating device may be high. Do not touch the hot
surfaces of the unit
For the sake of the environment. Dispose of cardboard packaging and polyethylene (PE) bags in the appropriate containers for separate
collection of municipal waste according to their description. If there are batteries in the device, remove them and separately return them to the
collection and storage facility. Return the used device to a suitable collection and storage facility, as the hazardous substances in it may pose
a threat to health and the environment. The marking on the product indicates that the device should not be disposed of in the container with
municipal waste. Waste electrical equipment, is waste that contains substances harmful to humans, animals and the environment. These
substances can lead to contamination of the soil, water or air, and through this they can enter the human body and lead to numerous health
ailments, such as vision, hearing, speech disorders, they can also damage the kidneys, liver and heart, and cause skin diseases. Harmful
substances can also have adverse effects on the respiratory and reproductive systems and lead to cancerous changes. Consumption of plants
growing on the complained of soils, and products made from them may risk the above-mentioned health effects. Do not dispose of the
device in the municipal waste container!!!
Service If you wish to purchase spare parts or report any complaints, please contact directly with the seller who issued the receipt.
Bedienungsanleitung (DE)
ALLGEMEINE SICHERHEITSBEDINGUNGEN
WICHTIGE SICHERHEITSHINWEISE FÜR DEN GEBRAUCH
SORGFÄLTIG LESEN UND FÜR SPÄTERE VERWENDUNG
AUFBEWAHREN
7
Advertenties
