9. Do not use the device with a damaged power cord or if it has been dropped
or damaged in any other way or malfunctions. Do not repair the device
yourself, as there is a risk of electrocution. Return a damaged device to a
competent service center for inspection or repair. Any repairs may be made
only by authorized service centers. Improper repair may cause serious danger
to the user.
10. Place the appliance on a cool stable, level surface, away from hot kitchen
appliances such as an electric stove, gas burner, etc.
11. Do not use the device near flammable materials.
12. The power cord must not hang over the edge of the table or touch hot
surfaces.
13. Do not leave the device plugged into an outlet unattended.
14. To provide additional protection, it is advisable to install in the electrical
circuit, a residual current device (RCD) with a rated residual current of not
more than 30 mA. In this regard, consult a specialist electrician.
15. If it is necessary to use an extension cord, use only one with a grounding
pin and suitable for the loaded power, not less than the iron connected to it.
Other ("weaker") extension cords may overheat. Arrange the cable so as to
avoid accidental pulls or tripping over it.
16. Always, before filling the iron with water or when the iron is not in use,
disconnect it from the power supply.
17. Touching the hot foot, contact with hot steam or water risks burns. Be
careful when you turn the iron upside down with the foot, as there may still be
hot water in the reservoir, even when the iron is unplugged.
18. DO NOT allow the hot iron to come into contact with fabrics or flammable
materials for too long.
19. Be careful that the power cord does not come into contact with the hot iron
foot. Allow the iron to cool completely before putting it away.
20. If you do not use the iron even for a short time, turn off the steam options.
21. Do not, under any circumstances, iron clothes or materials on people or
animals.
22. Never direct the steam onto people or animals.
23. Use the iron on a stable level surface and only put it down on such a
surface.
24. Do not pour water with chemical additives, fragrances or descaling
preparations into the tank.
25. Do not fill the water tank above the MAX level.
26. The power plug must be unplugged from the plug socket before filling the
4