Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
4. Technical data
12
For IR measurements, the area of the (folded) penetration
sensor tip should not be exposed to any heat sources such as
hand/finger. Otherwise, this can lead to measured value
deviations in several consecutive infrared measurements, as the
temperature sensor in the penetration sensor tip is used for
ambient temperature compensation.
4. Technical data
Feature
Penetration probe
Sensor type
Measuring range
Resolution
Accuracy (±1 digit)
°F)
Response time t99
Measuring rate
Infrared measurement
Lens
0.47")
Spectral range
Laser type
Output / wavelength
Class / standard
Measuring range
Resolution
Accuracy
(at 23°C, ±1 digit)
Measuring rate
General
Operating temperature
Transportation/
storage temperature
Power supply
Battery life
Housing
Protection class
Dimensions
Weight
Standards
EC Directive
Values
NTC
-50 to +250 °C / -58 to +482 °F
0.1 °C/°F/°R
±1.0 °C / ±1.8 °F (-50,0 to-30,1°C / -58.0 to -22.1 °F)
±0.5 °C / ±0.9 °F (-30,0 to +99,9°C / -22.0 to +211.9
±1 % of the measuring range (+100.0 to +250.0 °C /
+212.0 to +482.0 °F)
10 s (measured in moving liquid)
0.5 s
10:1 + opening diameter of the sensor (12 mm /
8 to 14 μm
2-point laser
< 1 mW / 650nm
2 / DIN EN 60825-1:2007
-30 - +250 °C / -22 - +482 °F
0.1 °C/°F/°R
±2.5 °C / ±4.5 °F (-30.0 to -20.1 °C / -22.0 to -4.2 °F)
±2.0 °C / ±3.6 °F (-20.0 to -0.1 °C / -4.1 to 31.9 °F)
±1.5 °C / ±2.7 °F or ±1.5 % of the measuring value
(0.0 to +250.0 °C / +32.0 to +482.0 °F)
0.5 s
-20 to +50 °C / -4 to +122 °F
-30...+70 °C / -22 to +158 °F (without batteries)
2 x AAA batteries
10 h (typical at 25°C / 77°F)
ABS/TPE/PC and die-cast zinc/stainless steel
IP65
281 x 48 x 21 mm / 11.06 x 1.89 x 0.83" (immersion/
penetration probe folded out)
178 x 48 x 21 mm / 7.01 x 1.89 x 0.83" (immersion/
penetration probe folded up)
197g / 0.433lbs (incl. batteries)
EN 13485
2014/30/EC
Advertenties
Inhoudsopgave
