Inhoudsopgave
Advertenties
If the battery voltage selection window does not open, then the battery is in a
state of extreme deep-discharge (less than 2 V). In this case, buffering is not per-
mitted. We recommend that the battery is replaced.
Danger following ignition of oxyhydrogen caused by sparks resulting from the
charging leads being disconnected too soon.
This can result in serious injury and damage to property.
▶
7
Interrupting
NOTE!
Buffering mode
Danger from disconnecting or unplugging the charging leads during buffering.
This can result in damage to connection sockets and connecting plugs.
▶
Resuming buffe-
ring
Set the correct battery voltage using the Up/Down
4
keys (6V / 12V / 24V).
Confirm the selection using the Stop/Start key
5
WARNING!
Before disconnecting the charging leads, press the Stop/Start button to fi-
nish buffering.
To cancel Buffering mode:
6
-
Disconnect the charger
-
Disconnect the black charging lead from the negative pole (-) of the bat-
tery
-
Disconnect the red charging lead from the positive pole (+) on the batte-
ry
Do not disconnect or unplug charging leads while buffering.
Press the Stop/Start key during buffering
1
-
Press the Stop/Start key
2
-
Press the Stop/Start key
The charging process is interrupted
Buffering is resumed
English
69
Advertenties
Hoofdstukken
Inhoudsopgave
