Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
1.
Place the device on a vertical and solid
surface. Use a spirit level when placing the
device (Figure 9, pos. 1).
2.
Place the device with a minimum distance
(Figure 9) of:
•
150 cm from the ceiling;
•
30 cm from the side walls;
•
30 cm from the floor;
•
50 cm clearance on the front side.
3.
Do not mount the device:
•
immediately below a socket outlet;
•
on a ceiling or roof.
4.
Drill two holes at least 610 mm above the
floor and with a distance of (Figure 10,
pos. A):
•
Alutherm 1000: 255 mm;
•
Alutherm 1500: 400 mm;
•
Alutherm 2000: 563 mm;
•
Alutherm 2500: 655 mm.
5.
Place wall plugs (Figure 10, pos. 2).
6.
Screw and tighten a left and a right bracket
(Figuer 10, pos. 3) to the wall with a large
screw (Figure 10, pos. 4) using a Phillips
screwdriver (Figure 10, pos. 1).
7.
Lay the device down on a soft steady surface
(Figure 11, pos. 4).
8.
Screw and tighten two brackets (Figure 11,
pos. 1) on both sides of the main body
(Figure 11, pos. 5) with a small screw
(Figure 11, pos. 2) using a Phillips screwdriver
(Figure 11, pos. 3).
30
Figure 9
Figure 10
Figure 11
Advertenties
Inhoudsopgave
