Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
3.2
Cutting Equipment
Max. saw blade diameter
Max. cutting depth
max. cutting speed
3.3
Design
1
Switch handle
2
Drive unit
3
Adjustable handle
4
Guard bow
5
Saw blade
6
Guide blade
7
Additional handle
8
Eccentric lever
9
Stand
10
Knob
11
Plug nipple
12
Ball valve, machine
13
Wing screw
14
Hexagon head screw
The complete sawing unit consists of the drive unit [2] with switching handle [1] and adjustable handle
[3]. The TR40 is provided electrically via the frequency converter FU6U. TR40 and FU6U are water proof,
i.e. on intended use no water can enter the motor.
3.4
Scope of delivery
Diamond ring saw with additional handle, drive wheel, frequency converter FU6U, adapter cable (CEE-
socket/shock-proof plug), combination spanner, face spanner and operators manual.
3.5
Noise emissions and vibration (EN 62841)
The typical A-weighted sound pressure level is 102 dB(A).
The typical A-weighted sound capacity level is 113 dB(A).
Uncertainty K =3 dB.
Vibration total values a
2
a
<2,5 m/s
, K=1,5 m/s
h
4.
P R E P A R A T I O N
Be convinced that the machine has not been damaged in transit. Check that the nominal voltage is the
same as the voltage indicated on the rating plate.
4.1
Electrical connection
4.1.1 230 ~
Connect the TR40 via the frequency converter FU6U and via the adapter cable only on a properly
earthed shockproof socket. If required use only high quality extension cords with sufficient cross section.
Up to 100m length - 3G2,5 quality, e.g. H 07BQ-F or H 07RN-F
4.1.2 400 3 ~
Connect the TR40 via the frequency converter FU6 only on a properly earthed shockproof socket. If
required use only high quality extension cords with sufficient cross section.
Up to 100m length - 4G2,5 quality, e.g. H 07BQ-F or H 07RN-F
Take care that the extension cord is not rolled up on use for reaching a sufficient heat
removal. Consider that the TR40 takes the maximal power from the electrical mains.
mm
mm
m/s
(triax vector sum) and uncertainty K determined according to EN 60745-2-22
h
2
.
400
300
42
15
T-Knob
16
Cover
17
Support roller
18
Guide roller
19
Hexagon head screw
20
Drive wheel
21
Eccentric shaft
22
Plug nipple, FU6U
23
Power plug
24
Ball valve, FU6U
25
Connection socket
26
LED
27
Main switch
20
Advertenties
Inhoudsopgave
