Download Print deze pagina

Kuppersbusch FWKU1870.0X Handleiding pagina 65

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

  • DUTCH, pagina 73
4. OPERATING INSTRUCTIONS
It is recommended that you installed your appliance in a place where the ambient temperature is
between 16-32°C. If the ambient temperature is above or below recommended temperatures, the
performance of the unit may be affected and it may not be possible to obtain temperature between 5-
12°C/12-20°C.
Temperature setting
A
ON/OFF switch, turn on by pressing once, turn off by pressing and holding 5 seconds.
B
Decrease temperature of 1 degree Celsius or Fahrenheit.
C
Raise temperature of 1 degree Celsius or Fahrenheit.
Display shows upper zone temperature at its setting. 5 seconds later it will automatically
D
turn to actual temperature inside the wine cellar till reaching setting one.
E
Temperature display in Celsius.
F
Temperature display in Fahrenheit.
Display shows lower zone temperature at its setting. 5 seconds later it will automatically
G
turn to actual temperature inside the wine cellar till reaching setting one.
Setting temperature checking switch. Touch key H once, display switch to setting
temperature with one zone flashing and the other one no flashing. touch it again to switch the
H
flashing. Only flashing zone could be adjusted by raise or decrease key. 5 seconds later
without operation display automatically turn to inner cabinet actual temperature till it reaches
the setting one.
Alarm cancel switch, press once to cancel the alarm. Press and hold 5 seconds to change
I
Celsius or Fahrenheit.
J
Light ON/OFF switch, turn on and turn off the light.
Temperature selection
The wine cooler has two temperature zones. The temperature setting of upper zone is adjustable with the
range 5-12°C, which is ideal for storing sparkling and white wines. The temperature setting of lower zone
is adjustable with the range 12-20°C, which is ideal for storing white and red wines.
NOTE: both two zones temperature could be set at 12ºC, and it is workable at the same time. But for
optimal performance, once one zone is set at 12ºC, we suggest another setting for the other zone
with 3°C difference at minimum (example: 5°C upper and 8°C lower). Maximum temperature
difference between both compartments is 10°C. Always set cooler temperature in the upper
compartment and warmer temperature in the lower compartment (example: 5°C upper and 15°C
lower).
• To select the temperature zone, press (H) once, upper zone will flash, (H) key pressing again to
59

Advertenties

loading