Advertenties
Beschikbare talen
Beschikbare talen
Reversible door for FWKU1800.0S
1.
Remove the ventilation grille (1) by unscrewing the screws (3) & (4). (Fig. 1)
2.
Remove the bottom hinge (5) by unscrewing the four lock screws (6). Be careful to hold the glass door
firmly after removing the screws. (Fig. 2)
3.
Gently pull down to remove the glass door from the right top hinge and place it on a padded surface to
avoid the risk of damage. Then remove the right top hinge. (Fig.3)
4.
Unscrew and transfer the hinge pin (7)
and/or the door stopper of the bottom hinge to
the opposite side. (Fig. 4)
5.
Remove the cap from position 9. Insert
the light switch supplied, and tighten the screw
to fix the light switch.
Remove the light switch from location 8 and
place the cap to cover the hole.
6.
Pop out the cover caps on the left side of
the cabinet and use them to cover the screw
holes on the right hand side.
7.
Screw the alternative left top hinge (10),
included in the fittings, on the left hand side of
the cabinet. (Fig. 5)
8.
Rotate the door at 180° and relocate the
door to the designated position. Then screw the
bottom hinge assembly on the left designated
position (Fig.6) and tighten it after the door is
leveled.
9.
Reassembly the ventilation grille.
58
Advertenties
