Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
SPECIFIC INFORMATION
INSTRUCTIONS FOR USE
Summary
C.A.M.P. Turbolock is:
This product is intended for use to protect and prevent against the risk of falling from a height in rescue operations,
in work at a height, in the practice of mountaineering, rock-climbing and other vertical sports that use similar
techniques. This product is not suitable for use as a component in a fall-arrest system. This product is not a lifting
machinery conforming to directive 2006/42/CE.
Compatibility
Carabiner
shaped connectors (
).
Rope
Turbolock must be used only in combination with the following ropes (
):
• Use in accordance with EN 12841/B: semi-static ropes conforming to EN 1891 Type A with diameter between 10
• Use in accordance with EN 12278 - EN 567: semi-static ropes conforming to EN 1891, dynamic ropes to EN 892, or
accessory ropes to EN 564, with a diameter between 8 to 13 mm.
XDB12, C.A.M.P. Cordino 8 mm ref. 0826.
the rope, and other variables such as: rope or pulley that are frozen, muddy, wet, dirty, aged, incorrectly stored.
check that the rope is intact. Avoid overloading or dynamic loads: risk of damage to the rope. The safe operation of
the device is related to the rope conditions: in the event the rope is damaged, it must be replaced.
Anchoring
For EN 12841/B use, the structural anchor point must comply with the standard EN 795 and/or known to have a
strength of 12 kN (metal anchors) or 18 kN (fabric anchors). For EN 12278 and EN 567 uses the anchor must comply
with one of the following standards: EN 566, EN 568, EN 569, EN 959, EN 12270, EN 12276. The anchoring point
must be at or above the position of the user/load, avoid leaving the rope loose: risk of breakage and severe injury in
the event of falling (
). Avoid external stress on the pulley (
).
Use
These instructions must be provided to the user. It is imperative during use that the device always be controlled
by the user. The use of gloves is recommended. When Turbolock is not in use and during transportation, keep the
locking cam [5] in the closed position, to avoid that the teeth do not damage other equipment.
22
Advertenties
Inhoudsopgave
