Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
AUTO settings
Summer/Winter change
Winter:
Summer:
Time to change:
On/Off group
NEn Sta
NEn Sta
3
-- --
4
5
On/Off ecoGEO group
Time to on next
Board switch
Unit address:
Switch to unit:
▪
NOTE
5.2.2. SCHEDULE menu
User menu
/8
/8
On/Off
aDate/time
Programming
bSchedule
Heating
cWeekly schedule
/8
Date/Time
Day:
Date:
Time:
Daily saving time
Enable:
Transition time:
Start: Last
in MARH
at
End: Last
in OTOBER
at
User menu
/8
On/Off
aDate/time
Programming
bSchedule
Heating
cWeekly schedule
/4
Heat pump schedule
Enable:
Day:
MONDAY
opy to:
MONDAY
: 4:
ON
: :
ON
3: :
ON
4: 4:
OFF
Setting up the AUTO program
The AUTO program can be used to adjust the outdoor temperatures and the time
needed to switch between the WINTER and SUMMER programs.
5h
On/Off group
Used to monitor the heat pumps that are connected to the supervisor via the pLAN bus.
Used to activate or deactivate the heat pumps that are connected.
-- --
-- --
On/Off ecoGEO group
min
Used to set the time to switch the next heat pump ON / OFF if the required service targets
are not reached.
pLAN network devices
5
Displays the address of the controllers that are connected to the pLAN network, as well
as their corresponding pGD1 screens.
The selected status of the e-SUPERVISOR that you select can be changed automatically using the time
schedule, calendar or active alarm functions.
Programming
/4
Date/Time
Sunday
This is used to adjust the day of the week, date (DD/MM/YY) and time (HH:MM 24-hour
//5
format) of the controller.
7:5
Daylight savings time
min
Used to adjust the settings of the automatic daylight savings time between the seasons
SUN
(autumn-winter / spring-summer).
:
SUN
3:
Programming
/4
BC Schedule
Used to schedule up to 4 time periods for each day of the week when the heat pump
NO
group will be turned completely on or off.
e-SUPERVISOR ecoSMART heat pump block manager
30
Control applications manual
Advertenties
Hoofdstukken
Inhoudsopgave
