Advertenties
Beschikbare talen
Beschikbare talen
Any other use is deemed not to be use as prescribed. The
manufacturer is not liable for any type of damage resulting
from this: the user bears the sole risk.
Independently made alterations to the circular saw preclude
any liability of the manufacturer for resulting damages of any
kind.
The circular saw may only be equipped, used and serviced
by persons who are familiar with these and have been
instructed in the hazards. Repair works may only be carried
out by us or by a customer service agent nominated by us.
The machine may not be used in a potentially explosive
environment or be exposed to the rain.
Metal parts (nails, etc.) must be removed from the timber to
be sawn.
Residual risks
Even if used properly, residual risks can exist even if the
relevant safety regulations are complied with due to the design
determined by the intended purpose.
Residual risks can be minimised if the "Safety information" and
the "Intended usage" as well as the whole of the operating
instructions are observed.
Observing these instructions, and taking proper care, will reduce
the risk of personal injury or damage to the equipment.
Danger of injury of fingers and hands by the tool (saw blade)
or work piece, e.g. when replacing the saw blade.
Injury from parts of the workpiece spinning off.
Throwback of the workpiece or workpiece parts.
Breakage and expulsion of saw blade.
Risk from electricity, by using non-standard electrical
connections.
Touching live parts of opened electrical components.
Impairment of hearing when working on the machine for
longer periods of time without ear protection.
Emission of harmful timber dust when operating without
exhaust suction.
In addition, in spite of all the precautionary measures taken,
non-obvious residual risks can still exist.
Safety instructions
Read all safety warnings, instructions,
illustrations and specifications provided with this power
tool. Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
For safety instructions, please refer to the enclosed
brochure "Safety instructions for crosscut and mitre saws".
Keep the instructions in a safe place for future use.
14
Description of device /
Spare parts
Please refer to the attached assembly and
operating instruction sheet.
Pos. Order-no.
1
Handle with On/Off switch
1A
On/Off switch
1B
Laser switch
2
Carrying handle
3
Motor
4
366066
Carbon brush cover
5
Transport locking pin
6
Set screw for the pulling device
7
366054
Handle for rotary table
8
Rotary table
9
366055
Table insert
10
Indicator for mitre angle
11
366056
Work piece stop
11A
366057
RH additional stop
11B
Locking screw for RH additional stop
11C
366058
LH attachment
11D
Locking screw for LH attachment
12
Set screw for work piece stop
13
Laser head
14
Locking screw for the laser
15
Protective cover
16
Pendulum cover
16A
Holder for the pendulum cover
17
Lock for pendulum cover
18
366086
Workpiece support
19
Fastening screw for workpiece support
20
Vice assembly
366060
22
Star grip
23
366011
Dust bag
24
Exhaust neck
25
Incline angle locking knob
25A
Anti-swivel device
26
Scale for incline angle
27
Indicator for incline angle
28
Set screw for 90° saw head incline
29
Locking nut for set screw (90°)
30
Set screw for 45° saw head position
31
Locking nut for set screw (45°)
32
Set screw for the saw blade position
33
Locking nut for set screw (saw blade
position)
34
366020
Hexagonal screw for saw blade mounting
35
366073
Front saw blade flange
36
366053
Saw blade (Ø 305 x 30 x 2.8 x 60T)
37
366075
Rear saw blade flange
38
Saw blade locking device
39
Montage-holes
40A
Front stand
40B
Counter nut for front stand
Designation
Advertenties
