Advertenties
Beschikbare talen
Beschikbare talen
Symbols Operating instructions
Threatened hazard or hazardous situation. Not
observing this instruction can lead to injuries or cause
damage to property.
Important information on proper handling. Not
observing this instruction can lead to faults in the
machine.
User information. This information helps you to use all
the functions optimally.
Assembly, operation and servicing. Here you are
explained exactly what to do.
Please refer to the attached assembly and
operating instruction sheet for references to
figure numbers in the text.
...
Symbols machine
Carefully read operator's manual before handling
the machine. Observe instructions and safety rules
when operating.
Wear eye and ear protection.
Wear dust mask.
Risk of injuries of fingers and hands by the saw
blade.
Do not expose to rain. Protect against humidity.
Shut off engine and remove power cord
before performing cleaning, maintenance or
repair work.
Attention! Laser radiation. Do not look into the
beam.
Danger area! Keep hands, fingers or arms away
from this area as much as possible.
This product complies with European regulations
specifically applicable to it.
Machine of the protection class II (double insulated)
Electrical devices do not go into the domestic rubbish.
Give devices, accessories and packaging to an
ecofriendly recycling.
According to the European Directive 2002/96/EC on
electrical and electronic scrap, electrical devices that are no longer
serviceable must be separately collected and brought to a facility
for an environmentally compatible recycling.
Characteristic noise values
DIN EN ISO 3744 / DIN EN ISO 11202 / ISO 7960 Appendix A
Use of machine as crosscut and mitre saw with standard saw
blade.
Noise power level
Operation
L
= 109.0 dB(A)
WA
under load
The factor of measurement uncertainty is 3 dB.
Please observe the following:
The indicated noise emission level has been measured
according to a standardised test method and can be used to
compare power tools.
The indicated noise emission levels can also be used for a
preliminary estimation of the load.
Noise emissions during actual use of the power tool
may differ from the stated values depending on the way in
which the power tool is used, in particular what type of
workpiece is being worked on.
It is necessary to define safety measures for the protection of
the operator that are based on an estimate of vibration stress at
the actual conditions of usage (for this, all parts of the operation
cycle have to be considered, e.g. times during which the power
tool is cut off and times during which it is switched on but runs in
no-load mode).
The sound pressure level at the workplace exceeds 80 db (A). In
this case, sound protection measures are required for the
operator (e.g., wearing hearing protection suitable for this
purpose as well as observing regular breaks).
Normal intended use
The device is suitable to cut wood and other wood-type
materials (e.g. particle boards) in the house and hobby field.
The device is suitable for crosscuts, inclined cuts, mitre cuts
and double mitre cuts.
The cutting of round material and irregularly shaped
materials (rickers, poles, fire wood etc.) is not permitted
since these work pieces cannot be held securely.
Only work pieces that can be put down securely and held
with clamping devices may be processed.
The use of saw blades made of HSS steel (high-alloy high
speed steel) is not permitted since this steel is hard and
brittle. Risk of injury through saw blade breakage and
expulsion of saw blade pieces.
The intended usage also includes compliance with the
operating, servicing and repair conditions prescribed by the
manufacturer and following the safety instructions included in
the instructions.
The relevant accident prevention regulations for the
operation as well as the other generally acknowledged
occupational medicine and safety rules must be complied
with.
Sound pressure level at the
workplace
L
= 96.0 dB(A)
PA
13
Advertenties
