5. Electrical connections
•
The product must be powered at a voltage of 230V AC 50Hz.
•
The product must be supplied with a cable and plug or with a cable for installation. If a product with plug is installed in
France, connect it to the mains power supply by cutting off the plug and using a suitable connection box.
•
If the product is supplied with a cable for installation without plug, connect it to the mains power supply using a 3-wire
cable (Brown=Live, Blue=Neutral, Black=Pilot wire) and a connection box. If you do not wish to use the pilot wire
functions, just connect the phase and the neutral wires: the product will work correctly even without the external
programmer.
•
In bathrooms, kitchens or other humid areas, install the connection terminal at least 25cm off the floor.
•
The electrical connection to the mains power supply must also include a 2-pole switch with a minimum contact aperture of
3mm. As a priority, always abide you national wiring rules.
•
It is not necessary to connect the appliance to the earth circuit. DO NOT CONNECT THE PILOT WIRE (BLACK) TO THE
EARTH CIRCUIT.
•
If the product is powered through a 30mA differential switch, make sure the pilot wire is also controlled by the differential
switch.
6. Using the product
6.1 Description of controls
A – Increase / Activate
B – Decrease / Deactivate
C – Display
D – Menu navigation / Back
E – Menu navigation / Forward
F – Switch on / Validation
G – Main switch
The touch buttons A and B are used to scroll through the items available within the various menus and to change the Comfort
and Eco temperatures.
The touch buttons D and E are used to navigate within some menus and to quickly change the operating mode. Button D allows
you to return to the previous phase at any time without changing the present settings.
A quick press of the F button allows you to switch the radiator on or off. Its long press for at least 3sec instead allows you to
access the main menu and all settings.
brown
black
NO!
blue
A
C
D
B
22
E
F
G