Advertenties
Beschikbare talen
Beschikbare talen
5.2 Disconnecting the rotary button
If you no longer wish to control a Bluetooth mesh receiver
using the rotary button, you have to disconnect the rotary
button. This interrupts the rotary button's connection.
1. Disconnect the mains power supply to the Bluetooth
mesh receiver that you want to disconnect from the rotary
button. To do this, pull the power supply unit out of the
mains socket.
2. Reconnect this Bluetooth mesh receiver to the mains sup-
ply (plug it into the socket).
3. Within the first five seconds of establishing the voltage
supply, press the knob of the rotary button seven times
in a row.
> The connected LED modules flash three times. After
this, the Bluetooth mesh receiver is no longer actuated
from the rotary button.
5.3 Operating the LIPROTEC system
with the rotary button
You can use the rotary button to jointly control all the LED
modules/strips that are connected to the Bluetooth mesh re-
ceivers. The Bluetooth mesh receivers have to be taught for
the rotary button.
22
Advertenties
