Advertenties
Beschikbare talen
Beschikbare talen
3. Use
The rotary button is intended solely for use in combination
with the system components of the Schlüter
tem and the Schlüter
The rotary button is intended for coupling with the Bluetooth
mesh receivers in the Schlüter
possible to remotely control the connected Bluetooth mesh
receivers. In addition to switching LED modules/strips on and
off, the lighting properties can also be adapted.
4. Installation
4.1 Attaching the adapter plate
Illustrated instructions
The rotary button is attached to the wall by means of the
adapter plate. The adapter plate can either be stuck to the
wall with adhesive or fastened to the wall using screws. The
holes for the screws on the adapter plate also match those
for standard switch fittings.
Fastening the adapter plate with adhesive strips
1. Clean the surface to which you wish to attach the adapter
plate and clean the back of the plate.
2. Remove the protective film from one side of one of the ad-
hesive pads.
18
-ZONES system.
®
-ZONES system, making it
®
» "I" on page 2
-LIPROTEC sys-
®
Advertenties
