Advertenties
Beschikbare talen
Beschikbare talen
LIPROTEC
5. Operation
5.1 Teaching the rotary button
To use the rotary button to control the LIPROTEC system, you
first need to teach the rotary button. Even if the rotary but-
ton loses its connection, it can be taught again as described
below.
Illustrated instructions
1. Disconnect the mains power supply to the Bluetooth mesh
receiver that you want to connect to the rotary button. To
do this, pull the power supply unit out of the mains socket.
2. Reconnect this Bluetooth mesh receiver to the mains sup-
ply (plug it into the socket).
3. Within the first five seconds of establishing the voltage
supply, press the knob of the rotary button five times in
a row.
> The status LED of the Bluetooth mesh receiver flashes
while the connection data for the rotary button is being
stored in the Bluetooth mesh receiver.
The rotary button is now taught. The Bluetooth mesh receiver
can now be controlled using the newly taught rotary button.
» "IV" on page 5
EN
21
Advertenties
