Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
7 Important informations
This unit can evaporate condensation and disperse it automatically through the exhaust hose.
1. When the unit is in cooling mode, the drainage pipe does not need to be attached.
GB
Please make sure that the rubber cap is firmly inserted in the drainage hole, when
the unit is running.
2. When operating in heating mode, the rubber cap "1" should be removed from the
drainage hole and a suitable drainage pipe attached in order to improve heating
performance.
3. When operating in dehumidifying mode the rubber cap "1" should be removed from
the drainage hole and a suitable drainage attached.
– Please remove the air exhaust hose, connect a drainage pipe to the drainage hole and
direct the water outside to improve dehumidifying performance.
– When the water tank is full,»E4» will be displayed on the display panel. Please remove
the rubber cap"2" from the drainage hole to drain out the water. After the drainage
has been fully drained, please restart the unit, and will then can operate normally..
92
Advertenties
Hoofdstukken
Inhoudsopgave
