Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
6.SPEED
Press to select either LOW, MEDIUM, HIGH or AUTO fan speed. If «AUTO» is selected (in
cooling mode),"HIGH" «MEDIUM» or "LOW» will be automatically selected according to
the difference between the temperature setting and the ambient temperature.
Note: In heating mode and dehumidifying mode, this button can not be operated because
the unit is preset to high speed in heating mode and low speed in dehumidifying mode.
GB
7.PROGRAMMABLE TIMER
Programmable timer ON/OFF button.
TIMER ON: The unit switches on.
1 Press the «TIMER» button in stand-by mode to set the time you desire.
2 Once the set time has elapsed, the unit will turn on automatically.
3 if you press the «POWER» button before the time has elapsed, the timer setting will
be canceled and the unit will turn on.
4 You can set the mode and fan speed while setting the timer.
TIMER OFF: The unit switches off automatically after the set has elapsed.
1 Press the «TIMER» button when the unit is operating to set the time you desire.
2 Once the set time has elapsed, the unit will turn off automatically.
3 If you presse the «POWER» button before the time has elapsed, the timer setting will
be canceled and the unit will turn off.
8.SLEEP CONTROL FUNCTION
1 In cooling mode, press the SLEEP button to set the temperature. It increases by 1°C
after an hour and at increases by a maximum 2°C after 2 hours.
2 In heating mode, press the SLEEP button to set the temperature. It decreases by 1°C
after an hour and decreases 2°C after 2 hours.
3 Press the SLEEP button again to cancel the setting.
9.ALARM
When the water tank is full,»E4» will be displayed on the display panel. To resume
operation, please remove the rubber cap from the drainage hose to drain the water
first. The E4 warning will disappear after draining, and then you can restart the unit by
pressing the POWER button.
90
Advertenties
Hoofdstukken
Inhoudsopgave
