Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
The most common cause of problems is interference due to electronic
factors. In this regard, some distance should be maintained to large
electronic devices (1-2 meters) in order to avoid electromagnetic
influences as far as possible. Any other wireless products that operate
within the range of the device can also have a negative influence on the
transmission contact.
When loss of radio contact occurs, consult the corresponding section of
the instruction manual in order to re-establish contact. If contact cannot
be re-established, or if it should be repeatedly interrupted, check the
general function of your devices when they are placed immediately next
to each other. If the function of the devices is generally possible, but the
transmission at the desired location(s) is not reliable, we recommend
changing the location of the logger and/or the transmitter/receiver in
order to optimize the connection.
PC-Software:
Note that there is a help function within the PC software and that an
instruction manual is included as a PDF-File within the installation folder
of the software.
POSITIONING OF THE LOGGER
The KlimaLogg Pro can be placed on a table or mounted on a wall.
Before mounting it on a wall, ensure that any transmitters in use can be
correctly received at the desired mounting location.
CARE AND MAINTENANCE
Clean the instrument and the transmitter with a soft damp cloth. Do
not use solvents or scouring agents. Protect from moisture.
Invisible obstacles:
1.
Attach an appropriate screw (not included in
the scope of delivery) to the wall and
ensure that its head is approx. 5 mm from
the wall.
Fold in the logger's table stand and hang it
2.
on the screw using the eyelet on its back.
Ensure that the device is securely engaged
with the screw before letting go.
48
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
