Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
with a black bar.
The KlimaLogg Pro searches for transmitter signals for three
minutes.
If a transmitter signal is received, the bar under the
corresponding channel number disappears.
Transmitters that have already been entered remain, and
transmitters that were previously unknown are successively
assigned.
Transmitter search for a certain channel
Press + or - button during CH 1-8 appears in the display.
You can select now any channel.
The chosen channel number starts flashing.
After the desired channel is selected, CH x appears on the
display.
---- appears on the display if no transmitter is found, or the
serial number of a transmitter appears if a transmitter is
already entered on that channel.
Press and hold the OK/MAX/MIN button for 3 seconds to
start a transmitter search for that channel. Drücken um eine
Sendersuche für den ausgewählten Kanal zu starten
LEARNING and the channel numbers appear on the display
with a black bar.
The KlimaLogg Pro searches for transmitter signals for three
minutes.
Delete transmitter:
Press and hold the HIST/DEL button for 3 seconds during
CH1-8 appears in the display. Drücken, während CH1-8 im
Display erscheint.
All entered transmitters will be deleted.
DELETED appears in the display.
You can also delete single transmitters with the HIST/DEL
button.
RECORDING INTERVAL SETTING:
Press SET button twice in normal mode.
INTERVAL appears on the text display.
The recording interval indication next to symbol REC starts
flashing.
Default interval 0:15 HR:MIN correspond 15 minutes.
40
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
