Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
This output has two switching outputs that react as follows in case of an
alarm on channel 1.
Switch point 1, active when the temp. or rH is exceeded on channel 1.
Switch point 2, active when the temp. or rH is undershot on channel 1.
A switch point is active as long as the alarm limit is triggered and
deactivated again as soon as the respective value is again within the
standard range or the respective alarm setting is deactivated.
The open collector output has a jack for a 3.5 mm jack plug. The
following drawing shows the configuration.
Technical specifications:
Maximum switching voltage: 24V. DC
Maximum switching current: 400 mA
switch point 1
- high alarm -
switch point 2
- low alarm -
C = switch point 1, high alarm
B = switch point 2, low alarm
A = ground
Comply with the technical specifications.
Note:
46
Jack
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
