Download Inhoudsopgave Inhoud Print deze pagina

Open-Collector Hardware Output - TFA Dostmann KlimaLogg Pro Handleiding

Inhoudsopgave

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

  • DUTCH, pagina 52
A ring memory is used. That means that when all data sets have been
written, the oldest existing data sets is automatically overwritten by the
next new data set. On the memory indication, the logger displays the
amount of data sets that has not yet been transferred to a PC (in
percentage).
Synchronisation:
The KlimaLogg Pro has a USB button. When the PC software requests
that synchronization be started, please press and hold the USB button
on the KlimaLogg Pro for three seconds until a brief beep is heard and
the USB symbol on the toolbar flashes. The synchronization must then
be confirmed in the PC software.
If the synchronization is successful, another beep sounds and the USB
symbol is displayed steadily. The KlimaLogg Pro starts to transfer his
datas to the PC.
Initiate contact:
Synchronization is only required once in order to assign the logger to the
software. In order to initiate contact to the software during the next start,
it is only necessary to press the USB button once. The KlimaLogg Pro
then attempts to establish the connection for 5 seconds and displays the
assignment received from the software on the text display.
For information about the operating of the PC software, we recommend
that you use the manual (which is available as PDF file at the installation
folder of the software) or use the help function in the PC software.
Note:
You can activate an automatic USB-connection (every full hour) in the
Set-mode.
The data sets that have been recorded are wirelessly transferred to the
PC using the USB transceiver. The average transfer speed is 20 data
sets per second. In extreme cases, it can take almost 45 minutes until all
data sets have been downloaded (when the memory is completely filled).
During radio-clock reception, communication with the USB receiver is not
possible and is interrupted. When reception is successful,
communication is automatically restored again.
OPEN COLLECTOR HARDWARE OUTPUT:
The KlimaLogg Pro has an open collector hardware output.
45

Advertenties

Inhoudsopgave
loading

Deze handleiding is ook geschikt voor:

30.3039.it

Inhoudsopgave