Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
4.3 Heating Mode
Step 1 : Press
to switch on your pump.
Step 2 : Press
to switch from one mode to another until the heating mode is
M
displayed.
Step 3 : Using buttons
Useful information about how the heating mode operates
When the incoming water temperature is less than or equal to the required
temperature (setpoint temperature) -X°C, the heat pump will switch to heating
mode. The compressor will stop when the temperature of the incoming water is
greater than or equal to the required temperature (setpoint temperature).
Indicators for adjustment range X and Y
X : adjustable parameter from 1° to 10°C, default setting is 3°C.
4.4 Cooling mode
Step 1 : Press
to switch on your pump.
Step 2 : Press
to switch from one mode to another until the cooling mode is
displayed.
Step 3 : Using buttons
EXAMPLE :
If the current temperature is 30°C, default setting temperature is 27° required
temperature is 15°C.
4.5 Auto mode (Full Inverter)
Step 1 : Press
to switch on your pump.
M
Step 2 : Press
to switch from one mode to another until the auto mode is
displayed.
Step 3 : Using buttons
EXAMPLE :
If the current temperature is 30°C, default setting temperature is 27° required
temperature is 15°C.
MV-1058-1059-04-2022 . swim-fun.com © All rights reserved Swim & Fun A/S
and
select the required temperature.
and
select the required temperature.
and
select the required temperature.
UK
121
Advertenties
Hoofdstukken
Inhoudsopgave
