Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
3.
Installation
The heat pump is very easy to install, only water and power need to be
connected during installation.
3.1
Location
The heat pump should be located at least 2.5 meter away from the swimming
pool.
Please comply with the following rules concerning the choice of heat pump
location.
1. The unit's future location must be easily accessible for convenient operation
and maintenance.
2. It must be installed on the ground, laid ideally on a level concrete floor. Ensure
that the floor is sufficiently stable and can support the weight of the unit.
3. Check that the unit is properly ventilated, that the air outlet is not facing
the windows of neighboring buildings and that the exhaust air cannot
return. In addition, provide sufficient space around the unit for servicing and
maintenance operations.
4. The unit must not be installed in an area exposed to oil, flammable gases,
corrosive products, sulfurous compounds or close to high frequency
equipment.
5. To prevent mud splashes, do not install the unit near a road or track.
6. To avoid causing nuisance to neighbors, make sure the unit is installed so
that it is positioned towards the area that is least sensitive to noise.
7. Keep the unit as much as possible out of the reach of children.
MV-1058-1059-04-2022 . swim-fun.com © All rights reserved Swim & Fun A/S
>2.5m
UK
117
Advertenties
Hoofdstukken
Inhoudsopgave
