Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
3
Preparation, installation and connection
3.1 Preparation
The heat pump must be placed on a flat and dry place, for example on some tiles.
The heat pump must always be kept vertical with the display facing up. Do not turn the
heat pump on for 24 hours after it has been transported or tilted.
Pool hose (art. 1582 or 1542) and clamps (art. 1524) not included.
If the water flow from the pool pump is greater than
what is allowed
Install a bypass (Bypass Kit art. 1572) if the water flow from the pool pump is more
than 20% greater than the maximum allowed flow through the heat pump's heat
exchanger.
The following things must be present in order for the heat pump to operate correctly.
• Fresh air
• Electric current
• Pool filter system with circulation pump
• Water in the pool
The unit can be installed at almost any outdoor location, as long as the specified minimum
distance to other objects is complied with (see drawing below).
3.2 Location
The heat pump must be placed at least 2 metres away from the pool.
MV-1295-1296-1297-10-2020 . swim-fun.com © All rights reserved Swim & Fun Scandinavia ApS
UK
55
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
