Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
•
Insert a new or cleaned exhaust air filter and reinsert the filter
cassette into the motor head.
Troubleshooting
Before the beginning of maintenance or repair works
you have to disconnect the plug from the mains!
Make sure that the water recycling system is always switched off and
disconnected from the mains for maintenance. Malfunctions are not always
due to defects in the unit.
Malfunction
Decrease in
vacuuming
power
WRS 50 does
not start
WRS 50 does
not start when
the tool is
switched on in
"Auto" mode
Remove the vacuum hose and close the vacuum socket with
the cap. Stow the accessories in the accessory storage provided at the
back of the vacuum cleaner. Wrap the vacuum hose around the vacuum
cleaner using the hose hooks. Pin the hose ends together to prevent dirt
particles from escaping. Wind the cable from the water recycling system and
place it around the push bar or the hose hook. When transporting in
vehicles, ensure that the water recycling system is secured against slipping
and tipping in accordance with the applicable directives.
Environmental Protection
Raw material recycling instead of waste disposal
To avoid damages on transportation, the power tool has to be delivered in a
sturdy packing. Packaging as well as unit and accessories are made of
recyclable materials and can be disposed accordingly.
The tool's plastic components are marked according to their material,
which
makes
differentiated because of available collection facilities.
Possible cause
- Filter bag full
- Nozzle, pipes or hose
clogged
- Mains plug not plugged in
- No mains power
- Connection cable defective
- Water sensor switched off
- Power tool not plugged into
socket on WRS 50
Transport
it
possible
to
Action to be taken
- Change
- Clean
- Plug in the mains plug
- Check fuse
- Renew
- Empty container and clean
electrodes
- Insert the mains plug into the
socket on the WRS 50
remove
environmental
18
friendly
and
Advertenties
Inhoudsopgave
